|
Post by 509nat on Oct 26, 2011 15:32:36 GMT -5
I'm a new member to this site and looking for suggestions to help me correct my steering problems. I added new 6" arched leaf springs to stock location spring mounts with 6 degree shims and an after market power steering kit from Speedway. Front drop axle sits 6 degree positive caster and steering drag link is parallel to pit man arm. On road test --- steering still has bump steer --- but not to bad suggestions!
Thanks, 509nat
|
|
|
Post by str8axle on Oct 29, 2011 11:18:12 GMT -5
Are you still using the stock drag link to the driverside knuckle, or have you gone to cross steer?
|
|
|
Post by 509nat on Jan 6, 2012 17:05:43 GMT -5
I installed the after market power steering kit mod kit from Speedway and it uses the the drag link on the driver side spindle. I'm thinking that cross steering would be give me less or very little bump steer.
|
|
|
Post by 509nat on Jan 6, 2012 17:22:31 GMT -5
FYI Attachments:
|
|
|
Post by Kustomizer on Jan 16, 2012 21:09:55 GMT -5
Welcome! It looks to like you need a cross steer setup. That will help a ton!
|
|
|
Post by 47gasser on May 24, 2012 0:07:15 GMT -5
you cant have the draglink angled like that.go with cross steer.been there Attachments:
|
|